Today, this editor mainly explains the structure and composition of the synchronous jack. This product is widely used in lifting operations in the fields of electric power, chemical industry, steel, construction bridges, and heavy machinery with small working spaces, and exerts its infinite power.

After understanding the principle and structure of the synchronous jack, we understand the characteristics of the ultra-thin Separate hydraulic jacks:

Single-acting design, spring retracts. The piston rod is plated with hard chrome to prevent scratches and corrosion. The dustproof ring design extends the service life of the jack. Models above 100T are equipped with handles for easy handling on site.

Note for synchronous jacks:

1. Before use, check whether each part is normal.

2. Strictly abide by the provisions in the main parameters when using it, and avoid super high and overload, otherwise, when the lifting height or the lifting tonnage exceeds the specified, serious oil leakage will occur at the top of the cylinder.

3. If the oil volume of the manual hydraulic oil pump body is insufficient, it is necessary to add N33# hydraulic oil which should be fully filtered to the pump before it can work.

4. Please refer to the manual of the electric pump station for the electric pump station.

　　5. The center of gravity of the weight should be moderate, and the jack should be selected reasonably. The bottom surface should be leveled. At the same time, the soft and hard conditions of the ground should be considered, whether it should be lined with tough wood, and whether it is placed smoothly to avoid sinking or tilting of the load.

6. ​​After the jack lifts the heavy object, the support should be used to support the heavy object in time. It is forbidden to use the jack as a support. If you need to support heavy objects for a long time, please use CLL self-locking jacks.

7. If several jacks need to be lifted at the same time, in addition to the correct placement of the jacks, a multi-jack diverter valve should be used, and the load of each jack should be balanced. Pay attention to keeping the lifting speed synchronized. It must also be considered that the ground may sink due to uneven weight to prevent the weight being lifted from tilting and causing danger.

8. When using, first connect the quick connector of the manual hydraulic oil pump with the top, then select the position, and tighten the oil drain screw on the oil pump to work. To lower the piston rod, loosen the hand wheel of the manual oil pump slightly in a counterclockwise direction, unload the oil cylinder, and the piston rod will gradually descend. Otherwise, the falling speed will be dangerous.

9. This jack has a spring return structure. After lifting, it can be quickly taken out, but the jack cannot be pulled by the connected hose.

　　 I believe that through the above information, Yangzhou Zhongke Hydraulic Machinery Co., Ltd. will provide you with the information about the principle and structure of the synchronous Separate hydraulic jacks. You should know something about it! If you need more information, please contact us. All my colleagues in our company are determined to achieve a win-win situation with customers with "high-quality products and high-quality services", and develop together to provide our customers with high-quality pre-sales, sales and after-sales services.